Brick Paver Installation & Edging



Staging of material

Most paver tasks will vary depending upon access, website conditions, project size and obviously, the weather. These circumstances can have an overall effect on your project from a timing stand point. Cautious consideration ought to be required to identify the time to begin the paver installation. Always aim to minimize or prevent any traffic on the ready areas.

The foreman or job supervisor ought to constantly have the materials (sand/ pavers) distributed around the task site for simple and effective setups. Paver pallets/bundles ought to be positioned in a manner not to disrupt the paver installation. The correct pallet/bundle placement can make the actual job installation much easier and quicker by decreasing the general labor of handling the material.

Brick paver patterns

Pavers can be positioned in several patterns depending on their shape. Each paver shape will generally have a number of various hatch patterns that are provided by the producer.

Professionals require to take into consideration the traffic weight loads on their paver jobs. In a lot of applications worldwide, it has been revealed that pavers laid in a herringbone pattern have actually performed properly.

Pavers that are 60 mm (2 - 3/8 in) density appropriate for pedestrian applications. Pavers that are going to be utilized in commercial or business applications need to be 80 mm (3 - 1/8 in) in thickness.

Reference/starting point for brick paver installation

There are a number of conditions that identify the beginning point of a paver task.

When beginning to install pavers it is best to snap a true straight chalk line on the surface of the bedding sand or pull a real straight string line above the surface area of the bed linen sand at the finished elevation of the pavers This will help as a guide for preserving straight joint lines and will also enable the installer to make changes in the positioning of the pavers.

Buildings and concrete curbing are normally not straight and need to not be used for establishing straight joint lines. The usage of string lines is essential to determine the true straightness of the edge. As the paver installation progresses, the string lines will help lessen the requirement for little trim pieces.

These will maintain a minimum joint width and allow the bedding and jointing sand to go into between each paver. Pavers with spacer bars are normally not laid in snug versus each other considering that a string line will supply consistent joint spacing.

Installation of brick pavers.

One of the most extensively utilized methods for the installation of pavers is hand installation of each paver. It is best to install a single row of pavers along one of the true straight lines that you have pulled or above the bed linen sand. The best method is to place a paver against another one and let it move down into the bed linen sand.

When installing pavers on a high grade, they should be installed at the base of the grade going uphill. This will prevent the pavers from creeping as they are being laid.

The finest method for setting up pavers on big jobs is to install them mechanically. There are a couple items a professional ought to consider prior to setting up pavers mechanically:

1.) Mechanical installers are just efficient in installing pavers in certain patterns.

2.) The contractor must make certain that the maker can manufacturing and bundling pavers in the desired pattern on the pallets for easy mechanical installation.

3.) Contractors might experience a color blending situation coming off the bundles of pavers Poor color mixing might result in a patchy looking installation. Most manufacturers are consistent with color mixing on each package of pavers, but it is the contractor's duty to make sure appropriate blending in the field.

Cutting procedures for brick pavers.

Professionals generally have 2 methods of cutting pavers. When cutting pavers wet, it will assist lessen dust and will prolong the diamond blades life. The operator of the brick saw need to constantly cut the pavers away from the surface of the paver field when cutting damp, due to the truth that the pavers will create a slurry that will stain the paver surface area.

The brick saw operator ought to always use the proper defense that is required for operating a saw, such as eye, ear, respiratory and hand protection ).

Edging types

Edge restraints play a significant role in the overall success of an interlocking pavement installation Edging restraints remove lateral movement of the pavers and hold the pavers securely together. Particularly at the outer border of the paver application, without an edging restraint, your project is ensured to fail over time.

Usually manufactured edge restraints are the most frequently used by professionals. Manufactured edging restraints can vary from, plastic edging, steel and aluminum, timbers or precast concrete and stone.

Edging installation.

This could result in the migration of the bedding sand and ultimate lateral motion of the pavers. If there is a possibility of losing bedding sand in between the pavers and the edge restraint, then geo textile material is recommended. When a space between the pavers and the edging surpasses 3/8" (10mm), then the area should be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers need to be compressed. The entire area that is to be Koi Pond Florida compressed need to be swept clean of any foreign items and particles that can cause scuffing or scratching on the surface of the pavers.

It is important to have a compactor that can put in in between 3000lbs. And 5000 lbs. Of centrifugal compaction force. In addition, it is essential that the very first compaction takes place before any jointing sand has actually been applied to the pavers. If jointing sand is applied to the pavers prior to compaction takes place, this can cause a bridging issue and will not allow the joints to be totally filled with jointing sand. This can also prevent the pavers from being correctly set into the bed linen sand.

When condensing the pavers, it is recommended that you make at least 2 passes in various instructions across the pavers. This will allow the pavers to be appropriately embeded in the bed linen sand and will force the bedding sand up into the joints from the bottom of the pavers.

The compaction of the pavers is extremely vital to the last efficiency of the pavers. Failure to do proper compaction can result in deformations and pavement failure gradually.


Paver pallets/bundles need to be positioned in a manner not to interfere with the paver installation. One of the most widely used techniques for the installation of pavers is hand installation of each paver. The operator of the brick saw need to constantly cut the pavers away from the surface of the paver field when cutting damp, due to the reality that the pavers will create a slurry that will stain the paver surface. Edging restraints eliminate lateral movement of the pavers and hold the pavers firmly together. When a space in between the pavers and the edging goes beyond 3/8" (10mm), then the area should be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *